FRIDA

Combining Beauty with Power

Goes Below 30 Hz

Sound you simply must hear to believe.

If you judged this speaker solely by its size, you’d be mistaken. Frida is a bookshelf speaker that defies expectations. It´s dynamic, highly resolved, and very evenly balanced throughout the frequency spectrum, covering frequencies from 30 Hz - 38 kHz with a flat frequency response. It creates a wide, balanced soundstage that’s perfect for smaller spaces or studios.

Frida comes with a dedicated stand, that matches the front baffle and cabinet, ensuring a seamless aesthetic and optimal performance.

Top End Components

All units are pre-matched into homogenous pairs before being mounted into loudspeakers.

The crossover is a 12 dB Linkwitz/Riley with incorporated T.I.M. reduction circuits 2750 Hz 12 dB per octave.

The tweeter is a 38 mm ring radiator selected to reproduce overtones freely, detailed, with very high resolution, and no tendency for intrusive resonances.

For the mid and low frequencies, we use a custom-made 5-inch woven mineral cone with excellent internal damping and extremely linear frequency response.The optimized center bullet reduces compression due to temperature variations in the voice coil. The lower suspension reduces sound reflection air flow noise and keeps cavity resonance to a minimum.

Ready to Connect

With terminals from WBT, Miflex, and Jantzen 3mm coils, and internal wiring from Van den Hul in a special hybrid configuration of pure copper and silver plating, Frida ensures unparalleled signal processing and minimal signal degradation.

Nothing is Left to Chance

Unique by Nature

Our speakers are designed with both precision and individuality in mind. Our cabinets—crafted from a fusion of carbonized and natural bamboo strips—feature stunning grain patterns, making every panel and speaker truly one of a kind.

Engineered for Pure Sound

At the same time, the unique pattern on our aluminum front baffle reduces unwanted reflections, ensuring a pure and immersive listening experience.

Every detail is intentional, and every material carefully chosen.

Learn More

Specifications

Terminology: 2-way passive loudspeaker

Dimensions (cm):
22 W x 35 H x 34 D

Weight: 12.5 kg (27.5 lbs) (without speaker stand)

Accessories: a speaker stand in aircraft aluminum
Dimensions:
41.6 W X 69 H X 29.5 D
Weight: 8 kg (17.6 lbs)

Weight Shipping: 71 kg (156.5 lbs)

Placement From The Wall (cm): 30 - 60

Recommended Room Size (kvm2): 15 - 30

The Recommended Power Amplifier: 30 - 200 watts

Sensitivity: 87 dB

Nominal Average Impedance: 6 - 8 ohm

Frequency: 32 Hz - 38 kHz

Press to view speaker measurements

A Story

"Overall and with everything I sat and listened intently to, I got the impression that the speakers were representing what they were being fed with and without forcing anything to the fore. In this respect I can tell you that this is a very balanced and well-poised loudspeaker! (...)

I listened to loads of music through these speakers and from lots of different genres and not once did I feel I was missing anything."

A fraction of the review by Stuart Smith, HiFi-PiG which ended in an Editors Choice Award. Follow the link below to read the full article.